News

 Before starting to build the welded wire fencing, we should have the tools and fence accessories required.

4*4 fence post, post hole diggers, level, tape measure, post level, extension cords, long string, deck screws, concrete, welded wire fence rolls, gate hinges and latches, circular saw and power drill, etc.

After the installation tools required, now we can begin to build the welded wire fence.
The welded wire fence height can vary from 4 to 6 feet. The fence post should be taller than the welded wire fencing by at least 2 feet. And measure the posts distance and put the right position. Please take attention to the corner and the fence gates.

Measure the square distances. Then get the numbers of fence posts, fence length and the corner posts. Each corner should have a post, generally the distance between posts is about 25 feet to 75 feet according to the need.

We can dig the post hole and place the post. We can use a string to keep all the post in a line level. Try to keep the post at a 90 degree angle to the ground.

Finishing the welded fence posts, we can attach the welded wire fence panel or welded wire fence rolls with the tie wire. Cut the fence rolls at each posts. Once you reach the corner, carefully stretch the wire around the corner and continue to the next post. Go back and secure the wire to the corner.

At last, install the welded fence gate.